(FPF1013 / FPF1014) IntelliMAX 1V Rated Advanced Load Management Products
FPF1013/4 IntelliMAXTM 1V Rated Advanced Load Management Products
December 2008
FPF1013/4
Features
0.8V to 1.8V Inpu...
Description
FPF1013/4 IntelliMAXTM 1V Rated Advanced Load Management Products
December 2008
FPF1013/4
Features
0.8V to 1.8V Input Voltage Range Typical RDS(ON) = 17mΩ @ VON - VIN = 2.0V Output Discharge Function Internal Pull-down at ON Pin Accurate Slew Rate Controlled Turn-on time Low < 1µA Quiescent Current ESD Protected, above 8000V HBM, 2000V CDM RoHS Compliant Free from Halogenated Compounds and Antimony Oxides
IntelliMAXTM 1V Rated Advanced Load Management Products
General Description
tm
The FPF1013/4 series is an IntelliMAX advanced slew rate loadswitch offering a very low operating voltage. These devices consist of a 17mΩ N-channel MOSFET that supports an input voltage up to 2.0V. These slew rate devices control the switch turn-on and prevent excessive in-rush current from the supply rails. The input voltage range operates from 0.8V to 1.8V to fulfill today's lowest Ultraportable Device's supply requirements. Switch control is via a logic input (ON) capable of interfacing directly with low voltage control signals. The FPF1014 has an On-Chip pull down allowing for quick and controlled output discharge when switch is turned off. The FPF1013/4 series is available in a space-saving 1X1.5 CSP-6L package.
Applications
PDAs Cell Phones GPS Devices MP3 Players Digital Cameras Notebook Computer
Pin 1
VIN VIN ON GND VOUT VOUT
www.DataSheet4U.com
BOTTOM
TOP
Typical Application Circuit
TO LOAD VIN VOUT
FPF1013/4 OFF ON ON GND
Ordering Information
P...
Similar Datasheet