(FPF1007 - FPF1009) Advanced Load Products
FPF1007-FPF1009 IntelliMAX™ Advanced Load Products
January 2008
FPF1007-FPF1009 IntelliMAX™ Advanced Load Products
Fea...
Description
FPF1007-FPF1009 IntelliMAX™ Advanced Load Products
January 2008
FPF1007-FPF1009 IntelliMAX™ Advanced Load Products
Features
1.2 to 5.5V Input Voltage Range Typical RON = 30 mΩ @ VIN = 5.5V Typical RON = 40 mΩ @ VIN = 3.3V Fixed Three Different Turn-on Rise-time 10µs/80µs/1ms Low < 10µA @ VIN = 3.3V Quiescent Current Internal ON Pin Pull Down Output Discharge Function ESD Protection above 8000V HBM and 2000V CDM RoHS Compliant
tm
General Description
The FPF1007/8/9 are low RDS P-Channel MOSFET load switches offered in a selection of 10µs, 80µs, and 1ms slew rate turn-on options for transient/in-rush current control. To support trends in mobile application requirements the minimum operating input voltage has been reduced down to 1.2V, the input current leakage has been minimized to extend battery life, and the ESD-protection has been designed to withstand a minimum of 8KV (HBM) and 2KV(CDM). The switch is controlled by an active-high logic input (ON pin) allowing it to interface directly with a low voltage control signal. An internal ON pin pull down resistor protects against an unintentional device turn-on while in the initial state. An On-chip pull-down resistor on the output is enabled when the switch is turned-off and provides a quick and robust discharge of the output load.
Applications
PDAs Cell Phones GPS Devices MP3 Players Digital Cameras Peripheral Ports Hot Swap Supplies Notebook Computer
www.DataSheet4U.com
Pin 1 BOTTOM TOP
...
Similar Datasheet