MX25L12805D

MX25L12805D 128M-BIT [x 1] CMOS SERIAL FLASH FEATURES GENERAL Serial Peripheral Interface compatible -- Mode 0 and Mode 3 134,217,728 x 1 bit structure 4096 equal sectors with 4K byte each 256 equal sectors with 64K byte each - Any sector can be erased Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations Latch-up protected to 100mA from -1V to Vcc +1V Low Vcc write inhibit is from 1.5V to 2.5V PERFORMANCE High Performance - Fast access time: 50MHz serial clock (30pF + 1TTL Load) - Fast program time: 1.4ms/page (typical, 256-byte per page) and 9us/byte (typical) - Fast erase time: 60ms/sector (4KB per sector), 0.7s/block (64KB per block) and 80s/chip - Acceleration mode: - Chip erase time: 50s (typical) Low Power Consumption - Low active read current: 25mA (max.) at 50MHz - Low active programming current: 20mA (max.) - Low active erase current: 20mA (max.) - Low standby current: 20uA (max.) - Deep power-down mode 20uA (max.) Typical 100,000 erase/program cycle 10 years data retention SOFTWARE FEATURES Input Data Format - 1-byte Command code Advanced Security Features - Block lock protection The BP0-BP3 status bit defines the size of the area to be software protection against program and erase instructions - Additional 512-bit secured OTP for unique identifier Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by...