EMC Choke Coil
EMC Choke Coil
Type: PFN1316
◆ Product Description
・18.5mm×14.5mm Max.(L×W), 20.5mm Max. Height ....
Description
EMC Choke Coil
Type: PFN1316
◆ Product Description
・18.5mm×14.5mm Max.(L×W), 20.5mm Max. Height . ・In addition to the typical versions of parameters shown here, custom parameters are available to meet your exact requirements.
◆ Feature
・Iron dust core is used to realize better DC Saturation characteristics and higher noise absorption effect. ・Less leakage magnetic flux . ・Ideally used as Normal Mode chokes EMI suppression in power supplies or signal lines. ・Elimination for impulse noise. ・RoHS Compliance
◆ Dimensions (mm)
φ16.5 MAX.
20.5 MAX.
. X A M 0 . 1
www.DataSheet4U.com
10.0
SOLDER φ0.65 MAX.
10.5
14.5 MAX. ADHESIVE
18.5 MAX.
◆ Specification
Part Name. PFN1316NP-NM29A PFN1316NP-NM39A Inductance D.C.R.(mΩ) (μH) [MIN.] [MAX.] At 1kHz (at20℃) 21 37 43 58 Impedance [MIN.] Rated Current (A)※1 5.4 2.9
①
544Ω ａt 5MHz 1245Ω ａt 5MHz
②
1180Ω ａt 10MHz 2070Ω ａt 7MHz
③
1245Ω ａt 20MHz 950Ωａt 15MHz
※1. Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
Please refer to the sales offices on our website for a representative near you
www.sumida.com
NO SOLDER DIP
1/1
...
Similar Datasheet
