EMC Choke Coil
EMC Choke Coil
Type: PFN1025
◆ Product Description
・￠26.0mm×12.0mm.MAX. ・In addition to the typic...
Description
EMC Choke Coil
Type: PFN1025
◆ Product Description
・￠26.0mm×12.0mm.MAX. ・In addition to the typical versions of parameters shown here, custom parameters are available to meet your exact requirements.
◆ Feature
・Iron dust core is used to realize better DC Saturation characteristics and higher noise absorption effect. ・Less leakage magnetic flux. ・Ideally used as Normal Mode chokes EMI suppression in power supply or signal line. ・Elimination for impulse noise. ・RoHS Compliance
◆ Dimensions (mm)
φ26.0 MAX.
NO SOLDER DIP
12.0 MAX.
1.5 MAX.
www.DataSheet4U.com
SOLDER
10.0±2.0
φ0.9 MAX.
◆ Specification
PART NO. PFN1Ø25NP-NM34A PFN1Ø25NP-NM46A PFN1Ø25NP-NM56A Inductance D.C.R.(mΩ) (μH) [MIN.] [MAX.] At 1kHz (at20℃) 32 59 88 31 43 53 Impedance [MIN.] Rated Current (A)※1 4.9 4.3 3.7
①
1060Ω ａt 5MHz 1345Ω ａt 3MHz 1370Ω ａt 2MHz
②
1730Ω ａt 7MHz 2285Ω ａt 4MHz 3160Ω ａt 3MHz
③
820Ω ａt 15MHz 2320Ω ａt 6MHz 1770Ω ａt 5MHz
※1. Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1
...
Similar Datasheet
