Full Bridge DC Motor Driver
SPF7302 Full Bridge DC Motor Driver
Features and Benefits
▪ Supply voltage, VBB , 36 V maximum ▪ Maximum DC current 3 A ...
Description
SPF7302 Full Bridge DC Motor Driver
Features and Benefits
▪ Supply voltage, VBB , 36 V maximum ▪ Maximum DC current 3 A continuous, 6 A pulsed (1 kHz, duty cycle < 1%, pulse width < 10 μs) ▪ RDS(on) = 300 mΩ maximum, at TJ = 125ºC ▪ Operation modes: forward, reverse, brake (high- or lowside freewheeling current circulation) ▪ Output disable pin (DI pin) ▪ Protections: ▫ Overvoltage protection (OVP), 36 V minimum ▫ Overcurrent protection (OCP), 3 A typical ▫ Overcurrent limitation (OCL), 6 A typical ▫ Externally adjustable delay timer to halt OCL ▫ Thermal shutdown protection (TSD), 151°C minimum ▫ Undervoltage lockout on VBB (UVLO), 4.2 V minimum ▫ Open load detection at startup ▪ Diagnosis output linked to OVP, OCP, TSD, UVLO, and open load detection, at startup and in operation Package: 16 pin HSOP with exposed thermal pad and tabs
Description
The SPF7302 is a fully protected, single chip full-bridge driver IC for DC brush motor applications. The various protection circuits integrated are: overvoltage protection (OVP); overcurrent protection (OCP) with latch, which is adapted to the DMOSFETs in each full bridge; undervoltage lockout (UVLO); open load detection; and overcurrent limitation. The package is a thermally enhanced 16-pin HSOP power package with an exposed thermal pad on the bottom side of the package.
Not to scale
Functional Block Diagram
www.DataSheet4U.com
CP VBB VREF Diag High-Side OCL High-Side Gate Driver with OVP HS1 IN1 IN2 DI LS1 Low-Side Gate Driver Di...
Similar Datasheet