AS8F2M32

AUSTIN SEMICONDUCTOR, INC. Austin Semiconductor, Inc. 2M x 32 FLASH FLASH MEMORY MODULE AVAILABLE AS MILITARY SPECIFICATIONS Military Processing (MIL-STD-883C para 1.2.2) Temperature Range -55C to 125C AS8F2M32 FLASH FIGURE 1: PIN ASSIGNMENT (Top View) 68 Lead CQFP FEATURES Fast access times of 90ns, 120ns, and 150ns 5.0V ±10%, single power supply operation Low power consumption(TYP): 4µA CMOS stand-by * TYP ICC(active) <120mA for READ/WRITE 20 year DATA RETENTION Minimum 1,000,000 Program/Erase Cycles per sector guaranteed 32 equal sectors of 64 Kbytes each Any combination of Sectors can be Erased Group Sector Protection Supports FULL Chip Erase Compatible with JEDEC standards Embedded Erase and Program Algorithms Data\ Polling and Toggle bits for detection of program or erase cycle completion. Erase Suspend/Resume Hardware Reset pin (RESET\) Built in Decoupling Caps and Multiple Ground Pins for Low Noise Operation Separate Power and Ground Planes to improve noise immunity www.DataSheet4U.com OPTION GENERAL DESCRIPTION The Austin Semiconductor, Inc. AS8F2M32 is a 64 Mbit, 5.0 voltonly Flash memory. This device is designed to be programmed insystem with the standard system 5.0 volt VCC supply. The AS8F2M32 offers an access time of 90ns, allowing high-speed microprocessors to operate without wait states. To eliminate bus contention, the device has separate chip enable (CE\), write enable (WE\) and output enable (OE\) controls. The devi...