LTC4252-2

LTC4252-1/LTC4252-2 LTC4252A-1/LTC4252A-2 Negative Voltage Hot Swap Controllers Features n Allows Safe Board Insertion and Removal from a Live – 48V Backplane n Floating Topology Permits Very High Voltage Operation n Current Limit With Circuit Breaker Timer n Fast Response Time Limits Peak Fault Current n Programmable Soft-Start Current Limit n Programmable Timer with Drain Voltage Accelerated Response n ±1% Undervoltage/Overvoltage Threshold Accuracy (LTC4252A) ■ Adjustable Undervoltage/Overvoltage Protection ■ LTC4252-1/LTC4252A-1: Latch Off After Fault ■ LTC4252-2/LTC4252A-2: Automatic Retry After Fault ■ Available in 8-Pin and 10-Pin MSOP Packages Applications n Hot Board Insertion n Electronic Circuit Breaker n – 48V Distributed Power Systems n Negative Power Supply Control n Central Office Switching n High Availability Servers n ATCA Description The LTC®4252 negative voltage Hot SwapTM controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled by three stages of current limiting: a timed circuit breaker, active current limiting and a fast feedforward path that limits peak current under worst-case catastrophic fault conditions. Adjustable undervoltage and overvoltage detectors disconnect the load whenever the input supply exceeds the desired operating range. The LTC4252’s supply input is shunt regulated, allowing safe operation with very high supply voltages. A multifunction timer delays initial startup and controls ...