CDR7xxxxxxx

www.DataSheet4U.com DIN41612 Connectors 1999 CDR7 DIN41612 Connectors Connectors www.DataSheet4U.com Introduction and Contents Description Page DIN41612 connectors are used throughout the electronics industry to connect printed circuit boards to one another. Being a long established and widely accepted standard, a very broad range of connector styles and configurations has been developed. Cannon’s CDR7 connector family reflects the breadth of options open to the hardware designer. t Shell styles B, C, D, E, F, G, H, and R give a varied selection of contact layouts and current carrying capabilities, with either pressfit or solder terminations. Combination layout connectors allow RF and high power inserts to be mixed with standard LF contacts. Extended contact tails are available for wire-wrapping or rear plug-up. First-to-mate and last-to-mate contacts can be loaded to allow the contact mating to be sequenced. E2X cable terminated connectors can be plugged onto the back of C and R style connectors for testing purposes or for board to board connections. If mis-mating connectors is a concern, coding accessories are available which can be installed without sacrificing contacts. t t t t Specification .......................................................................................... 3 Technical Notes PCB Through Hole Dimensions for Pressfit Connectors ............. 4 First-to-Mate or Last-to-Mate Contacts ....................................... 5 Printed Circuit ...