IDTCSPU877D

www.DataSheet4U.com IDTCSPU877D 1.8V PLL DIFFERENTIAL 1:10 SDRAM CLOCK DRIVER COMMERCIAL TEMPERATURE RANGE 1.8V PHASE LOCKED LOOP DIFFERENTIAL 1:10 SDRAM CLOCK DRIVER FEATURES: DESCRIPTION: IDTCSPU877D 1 to 10 differential clock distribution Optimized for clock distribution in DDR2 (Double Data Rate) SDRAM applications Operating frequency: 125MHz to 340MHz Very low skew: ≤40ps Very low jitter: ≤40ps 1.8V AVDD and 1.8V VDDQ CMOS control signal input Test mode enables buffers while disabling PLL Low current power-down mode Tolerant of Spread Spectrum input clock Available in 52-Ball VFBGA and 40-pin MLF packages APPLICATIONS: Meets or exceeds JEDEC standard 82.8 for registered DDR2 clock driver Along with SSTU32864/65/66, DDR2 register, provides complete solution for DDR2 DIMMs The CSPU877D is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK, CLK ) to 10 differential output pairs (Y [0:9], Y [0:9]) and one differential pair of feedback clock output (FBOUT, FBOUT). External feedback pins (FBIN, FBIN) for synchronization of the outputs to the input reference is provided. OE, OS, and AVDD control the power-down and test mode logic. When AVDD is grounded, the PLL is turned off and bypassed for test mode purposes. When the differential clock inputs (CLK, CLK) are both at logic low, this device will enter a low power-down mode. In this mode, the receivers are disabled, the PLL is turned off...