High Side Switches
VN5E010AH
10 m high-side driver with analog current sense for automotive applications
Features
Max supply voltage
VC...
Description
VN5E010AH
10 m high-side driver with analog current sense for automotive applications
Features
Max supply voltage
VCC
Operating voltage range
VCC
Typ. ON-state resistance
RON
Current limitation (typ)
ILIMH
OFF-state supply current
IS
1. Typical value with all loads connected
41 V 4.5 V to 28 V
10 m 85 A 2 µA(1)
General – Inrush current active management by power limitation – Very low standby current – 3 V CMOS compatible inputs – Optimized electromagnetic emissions – Very low electromagnetic susceptibility – In compliance with the 2002/95/EC european directive – Very low current sense leakage
Diagnostic functions – Proportional load current sense – High current sense precision for wide current range – Current sense disable – OFF-state open-load detection – Output short to VCC detection – Overload and short to ground (power limitation) indication – Thermal shutdown indication
Protection – Undervoltage shutdown – Overvoltage clamp – Load current limitation – Self limiting of fast thermal transients – Protection against loss of ground and loss of VCC – Overtemperature shut down with autorestart (thermal shutdown)
– Reverse battery protection with self switch on of the Power MOSFET (see Figure 32)
– Electrostatic discharge protection
Applications
All types of resistive, inductive and capacitive loads
Suitable as LED driver
Description
The VN5E010AH is a single-channel high-side driver manufactured in the ST proprietary VIPower M0-5 technology and housed...
Similar Datasheet