DatasheetsPDF.com

G24xxS-1W Dataheets PDF



Part Number G24xxS-1W
Manufacturers YUAN
Logo YUAN
Description DC/DC Converter
Datasheet G24xxS-1W DatasheetG24xxS-1W Datasheet (PDF)

SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. G/HXXXXS-1W SERIES DC-DC CONVERTER www.DataSheet4U.com RATED 1W OUTPUT HIGH POWER DENSITY 7PIN SIP /14PIN DIP PACKAGE G: DUAL OUTPUT; H: SINGLE OUTPUT INDUSTRIAL STANDARD PIN-OUT NO HEAT SINK REQUIRED 6KVDC ISOLATION FIXED INPUT UNREGULATED OUTPUT PCB MOUNTING ELECTRICAL SPECIFICATIONS All specifications tested typically @ 25°C, humidity<75%, nominal input and rated output unless otherwise noted. OUTPUT SPECIFICATIONS Items: Output accuracy: Output power:.

  G24xxS-1W   G24xxS-1W


Document
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. G/HXXXXS-1W SERIES DC-DC CONVERTER www.DataSheet4U.com RATED 1W OUTPUT HIGH POWER DENSITY 7PIN SIP /14PIN DIP PACKAGE G: DUAL OUTPUT; H: SINGLE OUTPUT INDUSTRIAL STANDARD PIN-OUT NO HEAT SINK REQUIRED 6KVDC ISOLATION FIXED INPUT UNREGULATED OUTPUT PCB MOUNTING ELECTRICAL SPECIFICATIONS All specifications tested typically @ 25°C, humidity<75%, nominal input and rated output unless otherwise noted. OUTPUT SPECIFICATIONS Items: Output accuracy: Output power: Line regulation: Load regulation: Ripple and noise: Temperature drift: Minimum load Switching frequency Short circuit protection Momentary 90KHz For Vin change of 1% From 20% to full load 20MHz bandwidth 10% Testing condition At full load and nominal Vin 0.1W 1W Min Typ Max ±5% 1W 1.2 8% 150 mV p-p ±0.02 %/°C 10% INPUT SPECIFICATIONS Items: Testing condition 3.3 VDC nominal input 5 VDC nominal input 9 VDC nominal input Input voltage range 12VDC nominal input 15 VDC nominal input 24VDC nominal input 10.8-13.2 13.5-16.5 21.6-26.4 Min Typ 3-3.6 4.5-5.5 8.1-9.9 Max Copyright @ Shenzhen Sunyuan Technology Co., Ltd. Edition-SZSY-07-01 Printed in P.R.C January 2007 Page 1 of 4 SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. G/HXXXXS-1W SERIES DC-DC CONVERTER www.DataSheet4U.com COMMON SPECIFICATIONS Items Operating temperature range Storage temperature range Humidity Cooling Isolation voltage (VDC) Isolation resistance (ohms) Isolation capacitance (pF) Efficiency (%) Case material Potting material Packing material Dimension (mm / inch) (L*W*H) Weight (g) MTBF (Hrs) See Product List 72 80 Input to Output Free Air Convection 6,000 109 30 Testing condition Min -40°C -55°C Typ. Max +85°C +105°C <90% Non-conductive black plastic Epoxy Resin UL94-V0 Tube 19.5*7.00*9.50 (0.76*0.28*0.37) 10 >1,000,000 PRODUCT LIST Input Voltage (VDC) Part Number Range Nominal Max. Current (mA) Voltage (VDC) Output Efficiency (%, Typ.) 71 80 80 80 78 75 74 76 72 75 70 70 80 78 75 77 76 Edition-SZSY-07-01 Package SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP Capacitor Load Max uF) 4.7 1 0.47 4.7 1 4.7 4.7 1 10 10 2.2 10 2.2 1 10 2.2 1 Page 2 of 4 G0505S-1W G0512S-1W G0515S-1W G1205S-1W 10.8-13.2 G1212S-1W G2403S-1W G2405S-1W G2412S-1W H0503S-1W H0505S-1W H0512S-1W H1205S-1W H1212S-1W H1215S-1W H2405S-1W H2412S-1W H2415S-1W 21.6-26.4 10.8-13.2 4.5-5.5 21.6-26.4 4.5-5.5 5 5 5 12 12 24 24 24 5 5 5 12 12 24 24 24 24 5.5 5.5 5.5 13.2 13.2 26.4 26.4 26.4 5.5 5.5 5.5 13.2 13.2 13.2 26.4 26.4 26.4 ±100 ±42 ±34 ±100 ±42 ±150 ±100 ±42 303 200 84 200 84 68 200 84 76 ±5 ±12 ±15 ±5 ±12 ±3.3 ±5 ±12 3.3 5 12 5 12 15 5 12 15 Copyright @ Shenzhen Sunyuan Technology Co., Ltd. Printed in P.R.C January 2007 SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. G/HXXXXS-1W SERIES DC-DC CONVERTER CONNECTING DC-DC CONVERTERS IN SERIES Galvanic isolation of the output allows multiple converters to be connected in series simply by connecting the positive output of one converter to the negative of another (see figure 1). In this way, non-standard voltage rails can be generated, however, the current output of the highest output voltage converter should not be exceeded. When converters are connected in series, additional filtering is strongly recommended as the converters switching circuits are not synchronized. As well as a summation of the ripple voltages, the output could also produce relatively large beat frequencies. A capacitor across the output will help, as will a series inductor. www.DataSheet4U.com CONNECTING DC-DC CONVERTERS IN PARALLEL If the available power output from a single converter is inadequate for the application, then multiple converters can be paralleled to produce a higher output power. However, it is not recommended to parallel converters to generate a higher power output, please select our higher power output modules or contact us for a customized solution. It should be noted that it is always preferable to parallel multiple converters of the same type. For instance, if a 2.5W converter is required, then either 2pcs AxxxxS-2W should be used or 3 AxxxxS-1W, not an AxxxxS-2W and an AxxxxS-1W. The reason for this is that the output voltages are not sufficiently well matched to guarantee that an AxxxxS-2W would supply twice as much as an AxxxxS-1W and the situation would occur where there was only 1W being drawn from the AxxxxS-2W and 1.5W from AxxxxS-1W. Even with paralleled converters of the same type, loading will be uneven, however, there is only likely to be around a 10% difference in output load when the output voltages are well matched. When connecting converter outputs, it should be remembered that the switching will not be synchronous, hence some form of coupling should be employed. One possible solution is to use a diode feed, this is suitable mainly for 12V and 15V output types only where the diode voltage drop (typically 0.6V) will not significantly affect the circuit functionality (see figure 2). With 5V and 9V supplies t.


G05xxS-1W G24xxS-1W H24xxS-1W


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)