FAN3100

FAN3100 — Single 2A High-Speed, Low-Side Gate Driver www.DataSheet4U.com April 2008 FAN3100 Single 2A High-Speed, Low-Side Gate Driver Features ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ 3A Peak Sink/Source at VDD = 12V 4.5 to 18V Operating Range 2.5A Sink / 1.8A Source at VDD = 6V Dual-Logic Inputs Allow Configuration as Non-Inverting or Inverting with Enable Function Internal Resistors Turn Driver Off If No Inputs 13ns Typical Rise Time and 9ns Typical Fall-Time with 1nF Load Choice of TTL or CMOS Input Thresholds MillerDrive™ Technology Typical Propagation Delay Time Under 20ns with Input Falling or Rising 6-Lead 2x2mm MLP or 5-Pin SOT23 Packages Rated from –40°C to 125°C Ambient Description The FAN3100 2A gate driver is designed to drive an Nchannel enhancement-mode MOSFET in low-side switching applications by providing high peak current pulses during the short switching intervals. The driver is available with either TTL (FAN3100T) or CMOS (FAN3100C) input thresholds. Internal circuitry provides an under-voltage lockout function by holding the output low until the supply voltage is within the operating range. The FAN3100 delivers fast MOSFET switching performance, which helps maximize efficiency in highfrequency power converter designs. FAN3100 drivers incorporate MillerDrive™ architecture for the final output stage. This bipolar-MOSFET combination provides high peak current during the Miller plateau stage of the MOSFET turn-on / turn-off process to minimize switching loss, while providin...