Document
74HC04; 74HCT04
Hex inverter
Rev. 5 — 27 November 2015
Product data sheet
1. General description
The 74HC04; 74HCT04 is a hex inverter. The inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
Complies with JEDEC standard JESD7A Input levels:
For 74HC04: CMOS level For 74HCT04: TTL level ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Multiple package options Specified from 40 C to +85 C and from 40 C to +125 C
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range
74HC04D
40 C to +125 C
74HCT04D
74HC04DB 40 C to +125 C
74HCT04DB
74HC04PW 40 C to +125 C
74HCT04PW
74HC04BQ 40 C to +125 C
74HCT04BQ
Name SO14
SSOP14
TSSOP14
DHVQFN14
Description
plastic small outline package; 14 leads; body width 3.9 mm
Version SOT108-1
plastic shrink small outline package; 14 leads; body SOT337-1 width 5.3 mm
plastic thin shrink small outline package; 14 leads; body width 4.4 mm
SOT402-1
plastic dual in-line compatible thermal enhanced very SOT762-1 thin quad flat package; no leads; 14 terminals; body 2.5 3 0.85 mm
NXP Semiconductors
4. Functional diagram
74HC04; 74HCT04
Hex inverter
$ $ $ $ $ $
< < < < < <
PQD
Fig 1. Logic symbol
PQD
Fig 2. IEC logic symbol
5. Pinning information
$<
PQD
Fig 3. Logic diagram (one inverter)
$ 9&&
$ < $ < $ < *1'
9&& $ < $ < $ <
DDF
Fig 4. Pin configuration SO14 and (T)SSOP14
WHUPLQDO LQGH[DUHD
< $ < $ <
*1'
$ < $ < $
*1' <
DDF
7UDQVSDUHQWWRSYLHZ
(1) This is not a supply pin. The substrate is attached to this pad using conductive die attach material. There is no electrical or mechanical requirement to solder this pad. However, if it is soldered, the solder land should remain floating or be connected to GND.
Fig 5. Pin configuration DHVQFN14
74HC_HCT04
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 27 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
2 of 15
NXP Semiconductors
74HC04; 74HCT04
Hex inverter
5.1 Pin description
Table 2. Pin description Symbol 1A, 2A, 3A, 4A, 5A, 6A 1Y, 2Y, 3Y, 4Y, 5Y, 6Y GND VCC
Pin 1, 3, 5, 9, 11, 13 2, 4, 6, 8, 10, 12 7 14
6. Functional description
Description data input data output ground (0 V) supply voltage
Table 3. Function table H = HIGH voltage level; L = LOW voltage level Input nA L H
7. Limiting values
Output nY H L
Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min Max Unit
VCC supply voltage IIK input clamping current IOK output clamping current IO output current
VI < 0.5 V or VI > VCC + 0.5 V VO < 0.5 V or VO > VCC + 0.5 V 0.5 V < VO < VCC + 0.5 V
0.5 [1] [1] -
-
+7 V 20 mA 20 mA 25 mA
ICC IGND Tstg Ptot
supply current ground current storage temperature total power dissipation
SO14, (T)SSOP14 and DHVQFN14 packages
50 65 [2] -
50 +150 500
mA mA C mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SO14 package: Ptot derates linearly with 8 mW/K above 70 C. For (T)SSOP14 packages: Ptot derates linearly with 5.5 mW/K above 60 C. For DHVQFN14 packages: Ptot derates linearly with 4.5 mW/K above 60 C.
74HC_HCT04
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 27 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
3 of 15
NXP Semiconductors
74HC04; 74HCT04
Hex inverter
8. Recommended operating conditions
Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V)
Symbol Parameter
Conditions
VCC VI VO Tamb t/V
supply voltage input voltage output voltage ambient temperature input transition rise and fall rate
VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V
9. Static characteristics
74HC04 Min Typ Max 2.0 5.0 6.0
0 - VCC 0 - VCC 40 +25 +125 - - 625 - 1.67 139 - - 83
74HCT04 Min Typ Max 4.5 5.0 5.5
0 - VCC 0 - VCC 40 +25 +125 --- 1.67 139 ---
Unit
V V V C ns/V ns/V ns/V
Table 6. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
25 C
40 C to +85 C 40 C to +125 C Unit
Min Typ Max Min Max Min Max
74HC04
VIH HIGH-level VCC = 2.0 V input voltage VCC = 4.5 V
1.5 1.2 -
1.5
-
1.5
-V
3.15 2.4 - 3.15
-
3.15
-V
VCC = 6.0 V
4.2 3.2 -
4.2
-
4.2
-V
VIL LOW-level VCC = 2.0 V input voltage VCC = 4.5 V
- 0.8 0.5
-
0.5
-
0.5 V
- 2.1 1.35 -
1.35
-
1.35 V
VCC = 6.0 V
- 2.8 1.8
-
1.8
-
1.8 V
VOH HIGH-level
VI.