LTM4606

Features n Complete Low EMI Switch Mode Power Supply n Wide Input Voltage Range: 4.5V to 28V n 6A DC Typical, 8A Peak Output Current n 0.6V to 5V Output Voltage Range n EN55022 Class B Certified n Output Voltage Tracking and Margining n PLL Frequency Synchronization n ±1.75% Total DC Error n Power Good Output n Current Foldback Protection (Disabled at Start-Up) n Parallel/Current Sharing n Current Mode Control n Up to 93% Efficiency at 5VIN, 3.3VOUT n Programmable Soft-Start n Output Overvoltage Protection n –55°C to 125°C Operating Temperature Range (LTM4606MP) n SnPb or RoHS Compliant Finish n 15mm × 15mm × 2.82mm LGA Package 15mm × 15mm × 3.42mm BGA Package Applications n ASICs or FPGA Transceivers n Telecom, Servers and Networking Equipment n Industrial Equipment n RF Equipment LTM4606 Ultralow EMI 28VIN, 6A DC/DC µModule Regulator Description The LTM®4606 is a complete EN55022 Class B certified noise high voltage 6A switching mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductor, and all support components. The on-board input filter and noise cancellation circuits achieve low noise operation, thus effectively reducing the electromagnetic interference (EMI). Operating over an input voltage range of 4.5V to 28V, the LTM4606 supports an output voltage range of 0.6V to 5V, set by a single resistor. This high efficiency design delivers 6A continuous current (8A peak). Only bulk input and output capacitors are...