1-port SATA2/SAS ReDriver
www.DataSheet4U.com
PI3EQX3851B
3.3V, 1-port, SATA2 i/m ReDriver™ with Analog Output Adjustment
Features
• • • • • • • ...
Description
www.DataSheet4U.com
PI3EQX3851B
3.3V, 1-port, SATA2 i/m ReDriver™ with Analog Output Adjustment
Features
SATA2 i, m; external SATA2 Two 3.0Gbps differential signal pairs Adjustable Receiver Equalization 100-Ohm Differential CML I/O’s Independent Analog output swing adjustment Independent Analog Output Emphasis Control Input signal level detect and squelch for each channel OOB Support Low Power (200mW per Channel) Stand-by Mode – Power Down State VDD Operating Range: 3.3V Packaging: − 20-TQFN (3.5x 4.5mm, ZH) − 20-TQFN (4x 4mm, ZD)
Description
Pericom Semiconductor’s PI3EQX3851B is a low power, signal ReDriver. The device provides programmable equalization, to optimize performance over a variety of physical mediums by reducing Inter-Symbol Interference. PI3EQX3851B supports two 100-Ohm Differential CML data I/O’s between the Protocol ASIC to a switch fabric, across a backplane, or to extend the signals across other distant data pathways on the user’s platform. The integrated equalization circuitry provides flexibility with signal integrity of the signal before the ReDriver. A low-level input signal detection and output squelch function is provided for each channel. Each channel operates fully independently. When the channels are enabled (CE=1) and operating, that channels input signal level (on xI+/-) determines whether the output is active. If the input signal level of the channel falls below the active threshold level (Vth-) then the outputs are driv...
Similar Datasheet