www.DataSheet4U.com
PIP201-12M-3
DC-to-DC converter powertrain
Rev. 03 — 19 November 2003 Product data
M3D797
1. Desc...
www.DataSheet4U.com
PIP201-12M-3
DC-to-DC converter powertrain
Rev. 03 — 19 November 2003 Product data
M3D797
1. Description
The PIP201-12M is designed for use as the power output stage of a synchronous buck DC-to-DC converter. It contains a MOSFET control IC and two power MOSFET
transistors. By combining the power MOSFETs and the driver circuit into a single component, stray inductances are virtually eliminated, resulting in higher switching frequency, lower switching losses and a compact, efficient design.
2. Features
s s s s s s s Input conversion range from 3.3 V to 12 V Output voltages from 0.8 V to 5 V Capable of up to 20 A continuous output current Operating frequency up to 1 MHz Peak system efficiency >90% at 500 kHz Low-profile, surface mount package (10 × 10 × 0.85 mm) Compatible with any single or multi-phase PWM controller.
3. Applications
s High-current DC-to-DC point-of-load converters s Small form-factor Voltage
Regulator Modules s Microprocessor and memory voltage
regulators.
4. Ordering information
Table 1: Ordering information Package Name PIP201-12M-3 HVQFN68 (MLF68) Description Version plastic thermal enhanced very thin quad flat package; no leads; SOT687-1 68 terminals; body 10 × 10 × 0.85 mm Type number
Philips Semiconductors
www.DataSheet4U.com
PIP201-12M-3
DC-to-DC converter powertrain
5. Block diagram
VDDC CB 11, 12 bootstrap capacitor driveH sourceH 10, 26, 27, 45 to 59 62 to 67, PAD3 VDDO 1 to 8, 60, 61 68, PAD1
PIP201-12M
13, 14 control cct ...