MX25L1605

www.DataSheet4U.com MX25L1605 Macronix NBit TM Memory Family 16M-BIT [x 1] CMOS SERIAL eLiteFlashTM MEMORY - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first) Status Register Feature Electronic Identification - JEDEC 2-byte Device ID - RES command, 1-byte Device ID - REMS command, ADD=00H will output the manufacturer's ID first and ADD=01H will output device ID first Additional 4Kb sector independent from main memory for parameter storage to eliminate EEPROM from system HARDWARE FEATURES SCLK Input FEATURES GENERAL Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3 16,777,216 x 1 bit structure 32 Equal Sectors with 64K byte each - Any sector can be erased Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations Latch-up protected to 100mA from -1V to Vcc +1V Low Vcc write inhibit is from 1.5V to 2.5V PERFORMANCE High Performance - Fast access time: 50MHz serial clock (30pF + 1TTL Load) - Fast program time: 3ms/page (typical, 256-byte per page) - Fast erase time: 1s/sector (typical, 64K-byte per sector) and 32s/chip (typical) - Acceleration mode: - Program time: 2.4ms/page (typical) - Erase time: 0.8s/sector (typical) and 25s/chip (typical) Low Power Consumption - Low active read current: 30mA (m...