NJG1107HB6

NJG1107HB6 www.DataSheet4U.com LOW NOISE AMPLIFIER GaAs MMIC QGENERAL DESCRIPTION NJG1107HB6 is a Low Noise Amplifier GaAs MMIC designed for GPS This amplifier provides low noise figure, high gain and high IP3 operated by single low positive power supply. This amplifier includes internal self-bias circuit and input DC blocking capacitor. This amplifier can be tuned to wide frequency point (1.5GHz~2.4GHz). An ultra small and ultra thin package of USB8-B6 is adopted. QFEATURES OLow voltage operation OLow current consumption OHigh small signal gain OLow noise figure OHigh Input IP3 OUltra small & ultra thin package QPIN CONFIGURATION HB6 Type (Top View) QPACKAGE OUTLINE NJG1107HB6 +2.7V typ. 2.5mA typ. 17dB typ. @f=1.575GHz 1.1dB typ. @f=1.575GHz -4.0dBm typ. @f=1.575+1.5751GHz USB8-B6 (Package size: 1.5x1.5x0.55mm) 4 5 3 6 A MP 2 Pin Connection 1.RFOUT 2.N/C 3.EXTCAP 4.N/C 5.N/C 6.GND 7. RFIN 8. N/C 7 8 1 Orientation Mark Note: Specifications and description listed in this catalog are subject to change without prior notice. Ver.2006-07-31 -1- NJG1107HB6 www.DataSheet4U.com QABSOLUTE MAXIMUM RATINGS (Ta=+25°C, Zs=Zl=50ohm) PARAMETER Drain Voltage Input Power Power Dissipation Operating Temp. Storage Temp. SYMBOL VDD Pin PD Topr Tstg VDD=2.7V At on PCB board CONDITIONS RATINGS 6.0 +15 135 -40~+85 -55~+150 UNIT V dBm mW °C °C QELECTRICAL CHARACTERISTICS (VDD=2.7V, f=1.575GHz, Ta=+25°C, Zs=Zl=50ohm, TEST CIRCUIT) PARAMETER Operating Frequency Drain Voltage Opera...