Over Tone Quartz Crystal Oscillator
NJU6397 Series
3rd. Over Tone Quartz Crystal Oscillator
GENERAL DESCRIPTION The NJU6397 series that is a C-MOS IC for ...
Description
NJU6397 Series
3rd. Over Tone Quartz Crystal Oscillator
GENERAL DESCRIPTION The NJU6397 series that is a C-MOS IC for quartz crystal oscillator consists of an oscillation amplifier and 3-state output buffer. The series has three types of A, B and C. The frequency range of the A type is from 75 to 90MHz, and the B type is from 90 to 110MHz, and the C type is from 110 to 135MHz. The oscillation amplifier realizes very low oscillation stop current with NAND circuit. The 3-state output buffer is C-MOS compatible.
PACKAGE OUTLINE NJU6397XC-X
FEATURES
Operating Voltage
2.3 to 3.6V
Maximum Oscillation Frequency (See Line-up Table)
High Fan-out
IOH/IOL= 6mA @VDD=2.5V
IOH/IOL= 8mA @VDD=3.3V
Oscillation Stop and Output Stand-by Function
3-State Output Buffer
Oscillation Capacitors Cg and Cg on-Die
Package Outline
Thin-Die/Wafer
C-MOS Technology
PAD LOCATION
Thin-Die
CONT XT
XT VSS
VDD FOUT
LINE-UP TABLE
Type No.
Recommended Oscillation Frequency
Output Frequency
Cg/Cd
A 75 to 90MHz NJU6397 B 90 to 110MHz
C 110 to 135MHz
f0
11/12pF 9/10pF 8/9pF
Note1) The oscillation frequency range has used NJRC’s characteristics authentication crystal for measurement. However is not guaranteed.
BLOCK DIAGRAM
XT Rf
XT Cg
Cd
COORDINATES
No Pad Name
X
Y
1 CONT
-178
231
2 XT
-178
77
3 XT
-178
-77
4 VSS
-178
-231
5 FOUT
206 -231
8 VDD
206 231
Starting Point:Die Center Die Size:0.70x0.75mm
Unit[um]
Thin-Die Thickness(C-D): 20020um Thin-Die Thickness(C...
Similar Datasheet