SPDT Switch Gaas Mmic
NJG1608KB2
www.DataSheet4U.com
SPDT SWITCH GaAs MMIC
Q GENERAL DESCRIPTION NJG1608KB2 is a SPDT switch IC featured low ...
Description
NJG1608KB2
www.DataSheet4U.com
SPDT SWITCH GaAs MMIC
Q GENERAL DESCRIPTION NJG1608KB2 is a SPDT switch IC featured low insertion loss, medium handling power and high isolation. This device is suitable for switching of Tx/Rx signals at sub-microwave applications. This switch exhibits wide frequency range from 100MHz to 6.0GHz at low operating voltage of 2.5V, and is operated up to 25dBm at 3.0V operating voltage. The Pb free FLP6 package is applied. Q FEATURES OSingle low voltage control OLow insertion loss OHigh isolation OHandling power OUltra small & ultra thin package Q PIN CONFIGURATION Orientation Mark KB2 Type Top view 1 2 3 6 5 4 Pin connection 1.P1 2.GND 3.P2 4.VCTL2 5.PC 6.VCTL1 Q PACKAGE OUTLINE
NJG1608KB2
+2.5~+6.5V 0.3dB typ. @f=2.5GHz 0.35dB typ. @f=2.5GHz 0.6dB typ. @f=5.85GHz 29dB typ. @f=2.5GHz 30dB typ. @f=2.5GHz, 18dB typ. @f=5.85GHz 30dBm typ. @f=2.5GHz, VCTL=3.0V FLP6-B2 (Package size: 2.0x2.1x0.75mm)
Q TRUTH TABLE “H”=VCTL (H), “L”=VCTL (L) VCTL1 VCTL2 PC – P1 PC – P2 H L OFF ON L H ON OFF
Ver.2005-06-17
-1-
NJG1608KB2
www.DataSheet4U.com
Q ABSOLUTE MAXIMUM RATINGS (Ta=25°C, Zs=Zl=50Ω) PARAMETER Input Power Control Voltage Power Dissipation Operating Temp. Storage Temp. SYMBOL Pin VCTL PD Topr Tstg CONDITIONS VCTL (L)=0V, VCTL (H)=3.0V VCTL (H)-VCTL (L) At on PCB board RATINGS 32 7.5 550 -40~+85 -55~+150 UNITS dBm V mW °C °C
Q ELECTRICAL CHARACTERISTICS (with application circuit, VCTL PARAMETERS Operating voltage (LOW) Operating voltage (HIGH) Co...
Similar Datasheet