MAX14532E

19-4597; Rev 0; 4/09 www.DataSheet4U.com USB 2.0 Hi-Speed and Audio Switches with Negative Signal Capability and ±15kV ESD General Description The MAX14531E–MAX14534E high ESD-protected DP3T switches multiplex Hi-Speed (480 Mbps) USB signals, low/full-speed USB signals, and analog signals such as AC-coupled audio or video through any of three channels. These devices combine the low oncapacitance (CON) and low on-resistance (RON) necessary for high-performance switching applications in portable electronics, and include an internal negative supply to pass AC-coupled audio signals that swing below ground (down to -2.0V). The MAX14531E– MAX14534E operate from a +2.7V to +5.5V supply. The MAX14531E–MAX14534E have a shutdown function to reduce supply current and set all channels to high impedance. The MAX14531E–MAX14534E feature a VBUS detection function through the CB0 input to automatically switch to the default USB signal path upon detection of a valid VBUS signal. The MAX14532E/MAX14534E feature internal shunt resistors on audio channels to reduce clicks and pops heard at the output. The MAX14531E–MAX14534E are available in a spacesaving, 12-bump, 1.5mm x 2.0mm WLP package and operate over the -40°C to +85°C temperature range. ♦ Low 10µA (typ) Supply Current ♦ -3dB Bandwidth: 800MHz (typ) ♦ Low 2Ω (typ) On-Resistance ♦ 0.05% THD+N ♦ Internal Shunt Resistor for Click-and-Pop Reduction (MAX14532E/MAX14534E) ♦ VBUS Detection for Automatic Switch Path Selection +28V Maximum Rated...