High Speed Differential Driver
www.DataSheet4U.com
Single, 3 V, CMOS, LVDS, High Speed Differential Driver ADN4661
FUNCTIONAL BLOCK DIAGRAM
VCC
FEATU...
Description
www.DataSheet4U.com
Single, 3 V, CMOS, LVDS, High Speed Differential Driver ADN4661
FUNCTIONAL BLOCK DIAGRAM
VCC
FEATURES
±15 kV ESD protection on output pins 600 Mbps (300 MHz) switching rates Flow-through pinout simplifies PCB layout 300 ps typical differential skew 700 ps maximum differential skew 1.5 ns maximum propagation delay 3.3 V power supply ±355 mV differential signaling Low power dissipation: 23 mW typical Interoperable with existing 5 V LVDS receivers Conforms to TIA/EIA-644 LVDS standards Industrial operating temperature range (−40°C to +85°C) Available in surface-mount (SOIC) package
ADN4661
DIN DOUT+ DOUT–
NC GND NC NC = NO CONNECT
NC
Figure 1.
APPLICATIONS
Backplane data transmission Cable data transmission Clock distribution
GENERAL DESCRIPTION
The ADN4661 is a single, CMOS, low voltage differential signaling (LVDS) line driver offering data rates of over 600 Mbps (300 MHz) and ultra-low power consumption. It features a flow-through pinout for easy PCB layout and separation of input and output signals. The device accepts low voltage TTL/CMOS logic signals and converts them to a differential current output of typically ±3.1 mA for driving a transmission medium such as a twistedpair cable. The transmitted signal develops a differential voltage of typically ±355 mV across a termination resistor at the receiving end, and this is converted back to a TTL/CMOS logic level by a line receiver. The ADN4661 and a companion LVDS receiver offer a new solution to ...
Similar Datasheet