300MHz To 450MHz ASK Receiver
19-4386; Rev 0; 3/09
KIT ATION EVALU E L B A AVAIL
300MHz to 450MHz ASK Receiver with Internal IF Filter
Features
o AS...
Description
19-4386; Rev 0; 3/09
KIT ATION EVALU E L B A AVAIL
300MHz to 450MHz ASK Receiver with Internal IF Filter
Features
o ASK/OOK Modulation o < 250µs Enable Turn-On Time o On-Chip PLL, VCO, Mixer, IF, Baseband o Low IF (200kHz Nominal) o 5.5mA DC Current o 1µA Standby Current o 3.3V/5V Operation o Small 20-Pin Thin QFN Package with an Exposed Pad
General Description
www.datasheet4u.com
MAX7036
The MAX7036 low-cost receiver is designed to receive amplitude-shift-keyed (ASK) and on-off-keyed (OOK) data in the 300MHz to 450MHz frequency range. The receiver has an RF input signal range of -109dBm to 0dBm. The MAX7036 requires few external components and has a power-down pin to put it in a low-current sleep mode, making it ideal for cost- and power-sensitive applications. The low-noise amplifier (LNA), phaselocked loop (PLL), mixer, IF filter, received-signalstrength indicator (RSSI), and baseband sections are all on-chip. The MAX7036 uses a very-low intermediate frequency (VLIF) architecture. The MAX7036 integrates the IF filter on-chip and therefore eliminates an external ceramic filter, reducing the bill-of-materials cost. The device also contains an on-chip automatic gain control (AGC) that reduces the LNA gain by 30dB when the input signal power is large. The MAX7036 operates from either a 5V or a 3.3V power supply and draws 5.5mA (typ) of current. The MAX7036 is available in a 20-pin thin QFN package with an exposed pad and is specified over the AEC-Q100 Level 2 (-40°C to +1...
Similar Datasheet