MAX15027

19-4488; Rev 0; 3/09 1.425V to 3.6V Input, 1A Low-Dropout Regulators with BIAS Input www.datasheet4u.com General Description o 1.425V to 3.6V Input Voltage Range Features o Output Voltage Programmable from 0.5V to VIN o Guaranteed Maximum 225mV Dropout at 1A Output Current o ±2% Output Accuracy Over Load, Line, and Temperature o Stable with Ceramic Capacitors o Fast Transient Response o 60µA Operating Bias Supply Current (MAX15028) o 1.2µA Shutdown Bias Supply Current (MAX15028) o Short-Circuit and Thermal Protection o -40°C to +125°C Operating Temperature Range o Soft-Start Limits Inrush Current o Thermally Enhanced 3mm x 3mm TDFN Package MAX15027/MAX15028 The MAX15027/MAX15028 low-dropout linear regulators operate from input voltages as low as 1.425V and deliver up to 1A of continuous output current with a typical dropout voltage of only 75mV. The output voltage is adjustable from 0.5V to VIN and is ±2% accurate over load and line variations, from -40°C to +125°C. The MAX15028 features a BIAS input of 3V to 5.5V from an always-on power supply. The BIAS input current is reduced down to less than 2µA during shutdown. These regulators use small, 1µF ceramic input capacitors and 4.7µF ceramic output capacitors to deliver 1A output current. High bandwidth provides excellent transient response and limits the output voltage deviation to 15mV for a 500mA load step, with only a 4.7µF ceramic output capacitor, and the voltage deviations can be reduced further by increasing the o...