Power over ethernet 10W module
SPDCPOE03
www.datasheet4u.com
Power over ethernet 10 W module
Preliminary data
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ...
Description
SPDCPOE03
www.datasheet4u.com
Power over ethernet 10 W module
Preliminary data
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Input voltage range: 38.5 V to 60 V 10 W output Based on ST devices integrating standard PoE interface and current mode PVM controller IEEE 802.3af compliant (PoE standard) Class 0 (zero), 0-12.96 W input Output voltage 3.3 V Output current 3 A Output voltage ± 5 % Ripple 1 % rms Transient response ±5 %, ½ load to full load Operating temperature range -40 °C to 70 °C Input transient suppressor Under voltage lockout Soft-start Short circuit protection 1500 VDC input/output insulation Input and output will be normally maintained within SELV limit Very compact size, about 86x24.2x17 mm Vertical THT package RoHS compliant UL 94V-0 flammability Device summary
Nominal input voltage Nominal output voltage 48 V 3.3 V Max efficiency TBD % Nominal power 10 W
Applications
■ ■ ■ ■ ■ ■ ■ ■
The target applications are small low power remote IP appliances. Security system, doors access, cameras, alarms Displays Public address systems Wireless access point Environmental control Telemetry Remote environmental monitoring
Table 1.
Order code SPDCPOE03
March 2009
Rev 1
1/6
www.st.com 6
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
Description
SPDCPOE03
1
www.datasheet4u.com
Description
SPDCPOE03 is a power module specifically designed to provide an isolated, lo...
Similar Datasheet