Aluminum Electrolytic SMT High Temp Reflow Capacitor
ALUMINUM ELECTROLYTIC CAPACITORS
WS
Chip Type, High CV High Temperature (260°C) Reflow
series
Corresponding with 260°...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
WS
Chip Type, High CV High Temperature (260°C) Reflow
series
Corresponding with 260°C peak reflow soldering Recomended reflow condition : 260°C peak 5 sec. 230°C over 60 sec. 2 times (φ8 × 6.2, φ10 × 10 : 1 time) Chip type higher capacitance in large case size. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC).
WS
High Temperature
www.datasheet4u.com
Reflow
UR
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Performance Characteristics
– 40 to +85°C 6.3 to 50V 22 to 1500µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (µA) .
Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ (MAX.)
6.3 0.28
10 0.24 6.3 5 10
16 0.20 10 4 8
25 0.16 16 3 6
35 0.14 25 2 4 35 2 3
50 0.12
Measurement frequency: 120Hz
Stability at Low Temperature
Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C
50 2 3
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±20% of initial value 200% or less of initial specified value Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no loa...
Similar Datasheet