Document
SM5010 series Crystal Oscillator Module ICs
www.datasheet4u.com
OVERVIEW
The SM5010 series are crystal oscillator module ICs. They incorporate oscillator and output buffer circuits, employing built-in oscillator capacitors and feedback resistors with excellent frequency response, eliminating the need for external components to form a stable crystal oscillator. There are 7 oscillator configurations available for design and application optimization.
FEATURES
I
7 types of oscillation circuit structure For fundamental oscillator • 5010A×× :Simple structure with low frequency variation • 5010B×× :Low crystal current type with RD built-in oscillation circuit • 5010CL× :Oscillation stop function built-in • 5010DN× :External capacitors, CG and CD required • 5010EA× :Low current consumption type For 3rd overtone oscillator • 5010F×× :Suitable for round blank • 5010H×× :External resistor, Rf required
I I I I
I I I I I
2.7 to 5.5V operating supply voltage Capacitors CG, CD built-in Inverter amplifier feedback resistor built-in Output duty level • TTL level: AK×, BK×, HK× • CMOS level: AN×, AH×, BN×, BH×, CL×, DN×, EA×, FN×, FH×, HN× Oscillator frequency output (fO, fO/2, fO/4, fO/8, fO/16 determined by internal connection) Standby function Pull-up resistor built-in 8-pin SOP (SM5010×××S) Chip form (CF5010×××)
SERIES CONFIGURATION
For Fundamental Oscillator
Version1 CF5010AN1 CF5010AN2 CF5010AN3 CF5010AN4 CF5010AK1 CF5010AH1 CF5010AH2 CF5010AH3 CF5010AH4 CF5010BN1 CF5010BN2 CF5010BN3 CF5010BN4 CF5010BN5 CF5010BK1 CF5010BH1 CF5010BH2 CF5010BH3 CF5010BH4 CF5010CL1 CF5010CL2 CF5010CL3 CF5010CL4 CF5010CL5 CF5010DN1 CF5010EA1 CF5010EA2 Operating supply voltage range [V] Built-in capacitance CG CD [pF] [pF] RD [Ω] Output current Output duty (VDD = 5V) level [mA] CMOS 2.7 to 5.5 29 29 – 16 CMOS/TTL TTL Output frequency fO fO/2 fO/4 fO/8 fO fO fO/2 fO/4 fO/8 fO fO/2 fO/4 fO/8 fO/16 fO fO fO/2 fO/4 fO/8 fO fO/2 fO/4 fO/8 fO/16 fO fO fO/2 INHN input level (VDD = 5V) Standby mode Oscillator stop function Output state
TTL
No
High impedance
4.5 to 5.5
29
29
–
16
TTL
No
High impedance
2.7 to 5.5
29
29
–
4
CMOS
TTL
No
High impedance
CMOS 2.7 to 5.5 22 22 820 16
CMOS/TTL
TTL
No
High impedance
4.5 to 5.5
22
22
820
16
TTL
TTL
No
High impedance
2.7 to 5.5
22
22
820
4
CMOS
TTL
No
High impedance
2.7 to 5.5
18
18
–
16
CMOS
CMOS
Yes
High impedance
2.7 to 5.5 2.7 to 5.5
– 10
– 15
820 820
16 4
CMOS CMOS
TTL TTL
No Yes
High impedance LOW
1. Package devices have designation SM5010×××S. SEIKO NPC CORPORATION —1
SM5010 series
SERIES CONFIGURATION
For 3rd Overtone Oscillator
Version www.datasheet4u.com CF5010FNA CF5010FNC CF5010FND CF5010FNE CF5010FHA CF5010FHC CF5010FHD CF5010FHE CF5010HN1 CF5010HK1 4.5 to 5.5 4.5 to 5.5 1.17 1.17 4.5 to 5.5 1.00 4.5 to 5.5 2.7 to 5.5 1.00 Operating supply voltage range [V] Built-in capacitance gm ratio CG [pF] 13 11 13 8 13 11 13 8 13 13 CD [pF] 15 17 17 15 15 17 17 15 17 17 Rf [kΩ] 4.2 3.1 2.2 2.2 4.2 3.1 2.2 2.2 200 200 16 16 CMOS TTL 4 CMOS 16 CMOS Output current (VDD = 5V) [mA] Output duty level
ORDERING INFORMATION
Device SM5010×××S CF5010×××–1 Package 8-pin SOP Chip form
PACKAGE DIMENSIONS
(Unit: mm) • 8-pin SOP
0.15 + 0.1 − 0.05
4.4 0.2
6.2 0.3
0.695typ 5.2 0.3
0.05 0.05
1.5
0.1
1.27
0.4 0.2
0.10 0.4 0.1 0.12 M
0 to 10
SEIKO NPC CORPORATION —2
SM5010 series
PAD LAYOUT
(Unit: µm)
www.datasheet4u.com
PINOUT
(Top view)
VDD
Q
(920,1180)
Y
HA5010
INHN XT XTN
1 2 3 4
8 7 6 5
VDD NC NC Q
(0,0) INHN XT XTN VSS X
Chip size: 0.92 × 1.18mm Chip thickness: 300 ± 30µm Chip base: VDD level
VSS
PIN DESCRIPTION and PAD DIMENSIONS
Pad dimensions [µm] Number Name I/O Description X 1 2 3 4 5 6 7 8 INHN XT XTN VSS Q NC NC VDD I I O – O – – – Output state control input. Standby mode when LOW, pull-up resistor built in. In the case of the 5010CL×, the oscillator stops and Power-saving pull-up resistor is built-in to reduce current consumption at standby mode. Amplifier input. Amplifier output. Ground Output. Output frequency (fO, fO/2, fO/4, fO/8, fO/16) determined by internal connection No connection No connection Supply voltage Crystal oscillator connection pins. Crystal oscillator connected between XT and XTN 195 385 575 765 757.6 – – 165.4 Y 174.4 174.4 174.4 174.4 1017.6 – – 1014.6
SEIKO NPC CORPORATION —3
SM5010 series
BLOCK DIAGRAM
For Fundamental Oscillator
www.datasheet4u.com
I
5010A××, B××, CL×, DN×, EA× series
VDD VSS XTN
CG Rf CD RD 1/2 1/2 1/2 1/2
XT
Q
INHN
For 3rd Overtone Oscillator
I
5010F××, H×× series
VDD VSS XTN
CG Rf CD
XT
Q
INHN
SEIKO NPC CORPORATION —4
SM5010 series
FUNCTIONAL DESCRIPTION
Standby Function
www.datasheet4u.com
5010AH×, AK×, AN×, BH×, BK×, BN×, DN×, FN×, FH×, HN×, HK× series
When INHN goes LOW, the output on Q becomes high impedance, but internally the oscillator does not stop. 5010CL× series When INHN goes LOW, the oscillator stops and the oscillator output on Q becomes high impe.