2W STEREO AUDIO AMPLIFIER
UNISONIC TECHNOLOGIES CO., LTD PA3017
2W STEREO AUDIO AMPLIFIER
DESCRIPTION
As a stereo audio speaker which is operat...
Description
UNISONIC TECHNOLOGIES CO., LTD PA3017
2W STEREO AUDIO AMPLIFIER
DESCRIPTION
As a stereo audio speaker which is operating on a single 5V supply, the UTC PA3017 is capable of delivering 2W of output power per channel into 3Ω loads with less than 1% THD+N. Way of two terminals (GAIN0 and GAIN1) can configured and control the amplifier gain. It also provide gain settings of 6 dB, 10 dB, 15.6 dB, and 21.6 dB (inverting). Other features include internal gain control which requires few external components, an active-low shutdown mode input and thermal shutdown protection.
FEATURES
* 2W output power into 3Ω load from 5V supply each channel * Gain control internally * Differential input fully * Depop circuitry * Shutdown protection thermally
ORDERING INFORMATION
Ordering Number PA3017G-N20-R
Package HTSSOP-20
CMOS IC
Packing Tape Reel
MARKING
www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 10
QW-R502-224.C
PA3017
PIN CONFIGURATION
CMOS IC
PIN DESCRIPTION
PIN NO. 1,11 13,20
2 3 4 5 6,15 7 8 9 10 12 14 16 17 18
19
PIN NAME GND GAIN0 GAIN1 LOUT+ LINPVDD RIN+ LOUTLIN+
BYPASS NC
ROUTVDD RINROUT+
SHUTDOWN
I/O DESCRIPTION Ground
I Bit 0 of gain control I Bit 1 of gain control O Positive output for left channel I Negative differential input for left channel I Supply voltage I Positive differential input for right channel O Negative output for left channel I Positive differential input for left channel
Tap to voltage divider for internal mid su...
Similar Datasheet