TSR30A

TS Series www.DataSheet4U.com Design and Component Specifications 20 to 100 Tons Electronic hot gas bypass for capacity control (two compressor units) Four-step compressor staging for capacity control (four compressor units) (Water-Cooled Units) Factory tested under full load conditions prior to shipment Electrical Features NEMA-4 electrical enclosure Control transformer to provide 115V/1/60 control voltage Compressor starters (and pump starters if pump tank option is purchased) mounted in control panel and wired to motors Single-point main power block for simple wiring connection Alarm horn and silence switch TSR40A With Pump/Reservoir Option General The TS Series central chillers are designed for indoor use in industrial manufacturing locations. The chillers are produced in our ISO 9001:2000 certified facility. Water-cooled units ship with a full refrigerant charge. Units with a remote air-cooled condenser ship with a nitrogen charge. All units are built on a rugged industrial duty frame and are finished with air-dry enamel paint. PLC Features Operator Control Station PLC (integrated Intel based microprocessor controller, operator interface, solid state input/output relays) Two line, 20 character alphanumeric display Digital set point and temperature deviation alarm adjustment with password protection Digital display of process water supply and return temperatures Alarm history screen User selectable lead/lag of refrigerant circuits Compre...