(PLL520-8x) Low Phase Noise VCXO
Preliminary
www.DataSheet4U.com
PLL520-88/-89
Low Phase Noise VCXO (9.5-65MHz)
PIN CONFIGURATION
FEATURES
• • • • • •...
Description
Preliminary
www.DataSheet4U.com
PLL520-88/-89
Low Phase Noise VCXO (9.5-65MHz)
PIN CONFIGURATION
FEATURES
19MHz to 65MHz fundamental crystal input. Output range: 9.5MHz – 65MHz Complementary outputs: PECL or LVDS output. Selectable OE Logic (enable high or enable low). Integrated variable capacitors. Supports 2.5V or 3.3V Power Supply. Available in 16 pin TSSOP package.
VDD XIN XOUT DNC S2 OE
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
DNC DNC GNDBUF QBAR VDDBUF Q GNDBUF GND
PLL 520-8x
DESCRIPTION
The PLL520-88 (PECL) and PLL520-89 (LVDS) are VCXO ICs specifically designed to work with fundamental crystals between 19MHz and 65MHz. The selectable divide by two feature extends the operation range from 9.5MHz to 65MHz. They require very low current into the crystal resulting in better overall stability. The OE logic feature allows selection of enable high or enable low.
VCON GND
OUTPUT SELECTION AND ENABLE
OE_SELECT OE_CTRL State
0
BLOCK DIAGRAM
1 (Default)
0 1 (Default) 0 (Default) 1
Tri-state Output enabled Output enabled Tri-state
O Q VCON X+ XOscillator Amplifier with Integrated Varicaps Q S2
Input selection: Bond to GND to set to “0”, bond to VDD to set to “1” No connection results to “default” setting through internal pull-up/-down. OE_CTRL: Logical states defined by PECL levels if OE_SELECT is “1” Logical states defined by CMOS levels if OE_SELECT is “0”
OUTPUT FREQUENCY DIVIDE BY TWO SELECTOR
S2 Output
PLL520-8X Block Diagram
0 1
Intput/2 I...
Similar Datasheet