DATA SHEET www.onsemi.com
LDO Regulator - Low IGND, CMOS with/without Enable and with Enhanced
500 mA
NCP605, NCP606
Th...
DATA SHEET www.onsemi.com
LDO
Regulator - Low IGND, CMOS with/without Enable and with Enhanced
500 mA
NCP605, NCP606
The NCP605/NCP606 provide in excess of 500 mA of output current at fixed voltage options or an adjustable output voltage from 5.0 V down to 1.25 V. These devices are designed for space constrained and portable battery powered applications and offer additional features such as high PSRR, low noise operation, short circuit and thermal protection. The devices are designed to be used with low cost ceramic capacitors and are packaged in the DFN6 3x3.3. NCP605 is designed without enable pin, NCP606 is designed with enable pin.
Features
Output Voltage Options:
Adjustable, 1.5 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V, 5.0 V
Adjustable Output by External Resistors from 5.0 V down to 1.25 V Current Limit 675 mA Low IGND (Independent of Load) $1.5% Output Voltage Tolerance Over All Operating Conditions
(Adjustable)
$2% Output Voltage Tolerance Over All Operating Conditions
(Fixed)
NCP605 Fixed is Direct Replacement LP8345 Typical Noise Voltage of 50 mVrms without a Bypass Capacitor Enhanced ESD Ratings: 4 kV Human Body Mode (HBM)
200 V Machine Model (MM)
These are PbāFree Devices
Typical Applications
Hard Disk Drivers Notebook Computers Battery Power Electronics Portable Instrumentation
1
DFN6, 3x3.3 MN SUFFIX CASE 506AX
MARKING DIAGRAM
xxxx zzz AYWWG
G
xxxx zzz
A Y WW G
= P605 or P606 = ADJ, 150, 180, 250, 280,
300, 330, 500 = Assembly Locati...