(CPA-xx) Base Mounted Attenuators
__ Stripline Base Mounted Attenuators
_ MECHANICAL SPECIFICATIONS
Heat Sink : Copper, Nickel Plated per QQ-N-290. Substr...
Description
__ Stripline Base Mounted Attenuators
_ MECHANICAL SPECIFICATIONS
Heat Sink : Copper, Nickel Plated per QQ-N-290. Substrate : Beryllium Oxide Ceramic. Contact :
www.DataSheet4U.com
Beryllium Copper, Gold Plated per MIL-G45204. Alumina Ceramic.
Cover :
Tolerance : ± .010" Unless specified.
high power Attenuators product selection chart CGI P/N Power Impedance Frequency Range VSWR Attenuation Values Note: Click a part number from the list below to see a data sheet for that part. DC - 1.0 GHz 1.15:1 CPA-20 20 W 50 Ω 1.0 - 2.5 GHz 1.35:1 1 to 20 dB 2.5 - 4.0 GHz 1.50:1 CPA-50 CPA-100 50 W 100 W 50 Ω 50 Ω DC - .500 GHz .500 - 1.0 GHz DC - .750 GHz 1.15:1 1.20:1 1.25:1 1 to 20 dB 1 to 20 dB
Component General Inc. 2445 Success Drive Odessa, FL 33556 Phone: 727-376-6655 or 800-246-4084
P/N: CPA-20
Stripline Base Mounted Attenuators
www.DataSheet4U.com
Mechanical Specifications
Covers:
Alumina Ceramic.
Attenuation Accuracy (dB)
dB 1-5 6-9 10 - 15 16 - 20 DC - 1 GHz ± 0.5 ± 0.5 ± 0.75 ± 1.0 1 - 2.5 GHz ± 0.5 ± 0.5 ± 1.0 ± 2.0 2.5 - 4 GHz ± 0.5 ± 1.0 ± 1.5 ± 3.0
Substrate:
Beryllium Oxide Ceramic.
Contact:
Beryllium Copper, Gold Plated per MILG-45204. Length: 0.250" Min., Width: 0.060" Typ. , Thickness 0.004" ± 0.002".
Heat Sink:
Copper, Nickel Plated per QQ-N-290.
Part Dimensions
Tolerance:
± 0.010" unless specified.
Electrical Specifications
Attenuation Values:
1 - 20 dB. (Other dB values available upon request.)
Frequency Range:
DC - 1.0 GHz 1.0 - 2.5 GHz 2.5 - 4.0 G...
Similar Datasheet