LOGARITHMIC DETECTOR / CONTROLLER
HMC611
v01.0408
60 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 10000 MHz
Typical Applications
The HMC611 is ideal for: ...
Description
HMC611
v01.0408
60 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 10000 MHz
Typical Applications
The HMC611 is ideal for: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar Power Monitoring & Control Circuitry
www.DataSheet4U.com
Features
Wide Dynamic Range: Up to 73 dB High Accuracy: ±1 dB with 51 dB Range Up to 8 GHz Supply Voltage: +5V Excellent Stability over Temperature Buffered Temperature Sensor Output Die Size: 1.39 x 1.34 x 0.25 mm
12
POWER DETECTORS - CHIP
Receiver Signal Strength Indication (RSSI) Automatic Gain & Power Control
Functional Diagram
General Description
The HMC611 Logarithmic Detector/Controller generates a voltage that is proportional to the log of the RF power envelop presented to its input. The HMC611 employs a successive compression topology which delivers extremely high dynamic range and conversion accuracy over a wide input frequency range. As the input power is increased, successive amplifiers move into saturation one by one creating an accurate approximation of the logarithm function. The output of a series of square law detectors is summed, converted into voltage domain and buffered to drive the LOGOUT output. For detection mode, the LOGOUT pin is shorted to the VSET input, and will provide a nominal logarithmic slope of -25 mV/ dB and an intercept of 9 dBm (24 dBm for ƒ ≥ 5.8 GHz). The HMC611 can also be used in the controller mode where an external voltage is applied to the VSET pin, to create an AGC or APC feedback loop...
Similar Datasheet