LANK

LANK 10W Series 2:1 Wide Input Range Single and Dual Output 10 Watt DC/DC Converter FEATURES ● I/O Isolation 1500VDC ● MTBF > 1,000,000 Hours ● Industry Standard Pinout ● High Efficiency up to 88% ● CSA1950 Safety Approval ● 2:1 Wide Input Voltage Range ● Complies with EN55022 Class A www.DataSheet4U.com ● Short Circuit and Over Voltage Protection SPECIFICATIONS: LANK 10W Series All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max INPUT (Vin) Input Voltage Range Start Voltage Under Voltage Shutdown Input Surge Voltage (1000ms) Reverse Polarity Input Current Reflected Ripple Current Short Circuit Input Power Input Filter OUTPUT (Vo) Output Voltage Range Output Voltage Accuracy Output Voltage Balance Load Regulation Load Regulation (2.5V output only) Line Regulation Output Power Output Current Range Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Transient Recovery Time Transient Response Deviation Temperature Coefficient PROTECTION Over Power Protection Short Circuit Protection Input Fuse Recommendation GENERAL Efficiency Switching Frequency Isolation Voltage Rated Isolation Voltage Test Isolation Resistance Isolation Capacitance Maximum Capacitive Load Internal Power Dissipation 12V input models 24V input models 48V input models 12V input models 24V input models 48V input models...