C8051F019

C8051F019 25 MIPS, 16 kB Flash, 10-Bit ADC, 48-Pin Mixed-Signal MCU Analog Peripherals 10-Bit ADC High-Speed 8051 µC Core - - ±1 LSB INL; no missing codes Programmable throughput up to 100 ksps 8 external inputs; programmable as single-ended or differential Data-dependent windowed interrupt generator Built-in temperature sensor (±3 °C) 16 programmable hysteresis values Configurable to generate interrupts or reset Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks Up to 25 MIPS throughput with 25 MHz system clock Expanded interrupt handler 1280 bytes data RAM 16 kB Flash; in system programmamble in 512-byte sectors (512 bytes are reserved) 16 port I/O; all are 5 V tolerant Hardware SMBus™ (I2C™ compatible), SPI™, and UART serial ports available concurrently Programmable 16-bit counter/timer array with five capture/compare modules 4 general-purpose 16-bit counter/timers Dedicated watchdog timer; bidirectional reset Internal programmable oscillator: 2–16 MHz External oscillator: Crystal, RC, C, or Clock Can switch between clock sources on-the-fly Typical operating current: 12.5 mA at 25 MHz Multiple power saving sleep and shutdown modes Memory Two Comparators Internal Voltage Reference VDD Monitor/Brown-out Detector Digital Peripherals On-Chip JTAG Debug & Boundary Scan www.DataSheet4U.com debug (no emulator required) - On-chip debug circuitry facilitates full speed, non-intrusive in-system Provides breakpoints, single stepping, ...