FMOPC8

FMOPC8 SERIES FMOEC8 8 PIN DIP SPECIFICATIONS ECL and PECL Voltage Options High Frequency Range Low Noise SMD Gull Wing Available +5.0, +3.3 or -5.2, Vdc PECL & ECL Clock Oscillators Parameter Frequency Range w w w . D a t Overall a S hFrequency e e t 4 Tolerance U . c o m Operating Temperature Range Storage Temperature Supply Voltage (Vdd) Supply Current Symmetry (Duty Cycle) Logic Type Output Load* Output “0” Level (VOL) Output “1” Level (V0H) Rise and Fall Time Pin 1 Options (See Spec Options N, C, T below and add option letter in part number) Aging @ 25°C PECL Specification 30.0 – 160.0 MHz ±20 ppm to ±100 ppm ECL 0.220 (5.6) MAX. HALF SIZE 8 PIN DIP 0.022 (0.56) 0 to +70° C Std. (See Temp. Range Options) -55° to +125° C +5.0 Vdc (±0.5 Vdc) -5.2 Vdc (±0.5Vdc) +3.3 Vdc (±0.3 Vdc) (See Voltage Options) 70 mA max. (+5.0 Vdd) 70 mA max. (-5.2 Vdd) 60 mA max. (+3.3 Vdd) 40/60% Std., 45/55% Avail. (See Spec. Options S) PECL / ECL squarewave, 100K Compatible 330 ohms to Vee. 50 ohms to -2 Vcd., ref. to Vdd. (See Test Circuits pg. 49) (Vdd - 1.60 Vdc) max. -1.62 Vdc max. (Vdd - 1.02 Vdc) min. -1.02 Vdc min. 2nS max. Pin 1: No Connection (N) Pin 1: Complementary Output (C) Pin 1: Tri-State (T) Tri-State Enable Low Level, (VIL –1.60) Vdc Max. Tri-State Disable High Level, (VIH –1.02) Vdc Min. When oscillator is disabled, the ouput is in a low state (VOL). (Inclusive of Operating Temp., Supply Voltage and Load) 0.018 (0.46) 0.510 (12.95) MAX. 1 4 0.250 (6.35) MAX....