Dual Element Detector
Lighting
|
Imaging
|
Telecom
Pyroelectric Infrared Detectors
Dual Element Detector
TO-5 housing Competitive cost v...
Description
Lighting
|
Imaging
|
Telecom
Pyroelectric Infrared Detectors
Dual Element Detector
TO-5 housing Competitive cost version Designed for motion control
The LHi 778 pyroelectric infrared-detector series are the standard dual element design recommended for all variants of motion control. They include a dual element pyro-electric ceramic element with Fet in source follower connection. LHi 778 detector is available in TO-5 housing with standard infrared filter. It provides high responsivity with excellent common mode performance (match) and low noise at steady state and temperature changes.
Parameters min Element size R esponsivity Match Noise Offset Voltage NEP
Right for modification reserved / WS /, 27.4.2001
p
LHi 778
D A T A S H E E T
LHi 778 typical 2x1 3 300 4000 1 20 0,2 7,5x10-10 5x10
7
ma x
units mm2 V /W
condition 2 elements 100°C, 1 Hz
10 50 1,55 28x10-10
% µV pp V W Ö Hz 25°C , 0,3...10Hz RS =47kW , 25°C 1Hz Bw, 100°C, 1 Hz
D* Output Impedance Operating Voltage
19x10 5
7
cm Ö Hz/W 1Hz Bw, 100°C, 1 Hz 10 15 kW V 47kW Load Res. RS =47kW , 25°C
2
Operating Temperature S torage Temperature
-40 -40
85 85
°C °C
non permanent non permanent
100
Sensing elements
10 R [kV/W] 1
(optically)
0,1 0,01 0,1 f [Hz] 1 10
Bottom view Dimensions in mm
Frequency Response
Europe: PerkinElmer Optoelectronics GmbH Wenzel Jaksch Str 31 Wiesbaden / Germany Phone +49(0)611 492 0 Fax +49(0)611 492 170
USA: PerkinElmer Optoelectronics 2175 Mission Colledge Blvd Sant...
Similar Datasheet