V600-HAM81

Intelligent Flag I/II V600-HA Innovative RFID Electronic Flags to Replace Mechanical Flag and Kanban Systems Doesn't need a program and can be used like a sensor. Advanced line construction at minimal cost. Saves space. Precise installation not required (Transmission distance: www.DataSheet4U.com 100 mm max.). A verification function provided on multi-functional type. Addition of 16-bit models to the series responds to applications from Kanban to quality control. Equipped with a wiring reduction mode and communications parity check function (16-bit models). Both NPN and PNP output available. FCC certified. Ordering Information/Specifications ■ Amplifier Type Item Power supply Input Model Read-only (8-bit) V600-HAR91 V600-HAR81 24 VDC ±10%, ripple (p-p): 10% Transistor output or contact output Short-circuit current: 3 mA (typical) (IN terminal and 0-V short-circuit) OFF voltage: 15 to 30 VDC ON voltage: 0 to 5 VDC Input impedance: 8.2 kΩ Applied voltage: 30 VDC max. Transistor output OFF voltage: 15 to 30 VDC Input impedance: 8.2 kΩ Short-circuit current: 3 mA (typical) (for 0-V short-circuit of INHIBIT/TRG) ON voltage: 0 to 5 VDC Applied voltage: 30 VDC max. Multi-functional (8-bit) V600-HAM91 V600-HAM81 Read-only (16-bit) V600-HAR92 Current consumption 130 mA max. Output NPN open collector output, 20 mA max. at 30 VDC, residual voltage: 2 V max. PNP open collector output, 20 mA max. at 30 VDC, residual voltage: 2 V max. NPN open collector output, 2...