DatasheetsPDF.com

BES516-34x-H2-Y Dataheets PDF



Part Number BES516-34x-H2-Y
Manufacturers Balluff
Logo Balluff
Description Inductive Sensors
Datasheet BES516-34x-H2-Y DatasheetBES516-34x-H2-Y Datasheet (PDF)

Inductive Sensors Contents Inductive – DC 3-/4-wire Our standard line in 3- and 4-wire DC versions In this comprehensive line Balluff offers proximity switches from ∅ 3 mm to 80×80 mm for virtually any application in the field of automation. These high-quality sensors have been developed and manufactured to the state-of-the-art in accordance with all relevant standards. Our 100 % final inspection of all products is your assurance that only carefully tested sensors leave our plants. 1.1.2 1.1..

  BES516-34x-H2-Y   BES516-34x-H2-Y


Document
Inductive Sensors Contents Inductive – DC 3-/4-wire Our standard line in 3- and 4-wire DC versions In this comprehensive line Balluff offers proximity switches from ∅ 3 mm to 80×80 mm for virtually any application in the field of automation. These high-quality sensors have been developed and manufactured to the state-of-the-art in accordance with all relevant standards. Our 100 % final inspection of all products is your assurance that only carefully tested sensors leave our plants. 1.1.2 1.1.3 1.1.5 1.1.6 1.1.8 1.1.12 1.1.13 1.1.22 1.1.30 1.1.38 1.1.44 ∅ 3 mm ∅ 4 mm ∅ 4 mm, M5 M5 ∅ 6.5 mm ∅ 8 mm M8 M12 M18 M30 Block style housings continuation 1.1 www.DataSheet4U.com Blackline Short housing Mid-length with maximum thread length Long housing mini.s 1.1.1 Inductive Sensors Housing size Mounting (see notes starting p. 1.0.11) Rated operating distance sn Assured operating distance sa DC 3-wire Block style housings sn 5 mm 42×48×22 mm flush 5 mm 0...4.1 mm 42×48×22 mm flush 5 mm 0...4.1 mm 42×48×22 mm 42×48×22 mm flush 5 mm 0...4.1 mm www.DataSheet4U.com PNP NO NC complementary NO NC complementary 1 2 3 4 5 6 BES 516-346-H2-Y-S 4 BES 516-341-H2-Y-S 4 BES 516-346-H2-Y-S 49 BES 516-346-H2-Y BES 516-341-H2-Y NPN BES 516-344-H2-Y BES 516-340-H2-Y Rated operational voltage Ue Supply voltage UB Voltage drop Ud at Ie Rated insulation voltage Ui Rated operational current Ie No-load supply current I0 max. Off-state current Ir Polarity reversal protected Short circuit protected Permissible load capacitance Repeat accuracy R Ambient temperature range Ta Frequency of operating cycles f Utilization category Function indicator Degree of protection per IEC 60529 Housing material Material of sensing face Connection max. wire cross-section Recommended connector 1 Wiring diagrams see page 1.0.6 Connector orientation 24 V DC 10...30 V DC ≤ 3.5 V 75 V DC 130 mA ≤ 25 mA ≤ 80 µA yes yes ≤ 1 µF ≤5% –25...+70 °C 500 Hz DC 13 yes IP 67 Anodized GD-Al PA 12 Connector 24 V DC 10...30 V DC ≤ 3.5 V 75 V DC 130 mA ≤ 25 mA ≤ 80 µA yes yes ≤ 1 µF ≤5% –25...+70 °C 500 Hz DC 13 yes IP 67 Anodized GD-Al PA 12 Connector 24 V DC 10...30 V DC ≤ 3.5 V 75 V DC 130 mA ≤ 25 mA ≤ 80 µA yes yes ≤ 1 µF ≤5% –25...+70 °C 500 Hz DC 13 yes IP 67 Anodized GD-Al PA 12 Screw terminals to 2.5 mm² BKS-_ 19/BKS-_ 20 BKS-_ 48/BKS-_ 49 1.1. 54 74×60.5×28 mm 74×60.5×28 mm flush 7 mm 0...5.7 mm Inductive Sensors DC 4-wire Block style housings sn 7 mm 1.1 www.DataSheet4U.com BES 516-161-H3-L BES 516-160-H3-L 24 V DC 10...30 V DC ≤ 1.5 V 75 V DC 400 mA ≤ 30 mA ≤ 130 µA yes no ≤ 1 µF ≤5% –25...+70 °C 300 Hz DC 13 yes IP 67 Anodized GD-Al PA 12 Screw terminals to 2.5 mm² 6 For additional multiple and single position limit switches in main catalog "The Mechanical Line", on CD-ROM or online! Connectors ... page 6.2 ... www.balluff.de 1.1.55 Inductive Sensors DC 4-wire Block style housings sn 15 mm 40×40×120 mm Housing size 40×40×120 mm Unisensor Mounting (see notes starting p. 1.0.11) flush Rated operating distance sn 15 mm Assured operating distance sa 0...12.2 mm Sensor body Sensor head www.DataSheet4U.com Sensor head base Sensor base PNP NPN complementary complementary 3 6 BES 517-132-M3-H-S 4 The Unisensor – multiple uses – The Unisensor is made up of three modular components: sensor head (including sensor head base), sensor body and sensor base. – Easily removable pin contacts join sensor head and sensor body, that means easy interchange of the modules without wiring. – Sensor base with wiring terminals, self-lifting pressure plates and ample wiring room. – Sensor head rotatable in 5 different positions for easy adaption to any application (see installation drawings). – Plastic housing of PBT. – DIN EN 60947-5-2 mounting dimensions. – LED for supply voltage. – LED for function indication – Also available in special configuration for the automotive industry – Cable fitting not included. – In the complementary version, output terminals 2 or 4 can be wired to configure the switch as normally-closed (terminal 2) or normally-open (terminal 4). Connecting both terminals allows the switch to be used as both (see connection diagram 3 or 6 ). Positioning the sensor head – Loosen the two holding screws on sensor head – Rotate sensor head 180° – tighten holding screws Rated operational voltage Ue Supply voltage UB Voltage drop Ud at Ie Rated insulation voltage Ui Rated operational current Ie No-load supply current I0 max. Off-state current Ir Polarity reversal protected Short circuit protected Permissible load capacitance Repeat accuracy R Ambient temperature range Ta Frequency of operating cycles f Utilization category Function/power indicator Degree of protection per IEC 60529 Insulation class Housing material Material of sensing face Connection max. wire cross-section Recommended connector possible mounting options 24 V DC 10...55 V DC ≤ 2.5 V 250 V AC 200 mA ≤ 20 mA ≤ 80 µA yes yes ≤ 1 µF ≤5% –25...+70 °C 100 Hz DC 13 yes/yes IP.


MT47H512M4 BES516-34x-H2-Y BES516-34x-H2-Y-Sx


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)