Photocoupler Photorelay
TOSHIBA Photocoupler PHOTORELAY
TLP3123
TLP3123
Measurement Instruments Power Line Control FA (Factory Automation)
Un...
Description
TOSHIBA Photocoupler PHOTORELAY
TLP3123
TLP3123
Measurement Instruments Power Line Control FA (Factory Automation)
Unit: mm
The TOSHIBA TLP3123 consists of an infrared emitting diode optically coupled to a photo-MOS FET in a plastic SOP package. The TLP3123 is a bi-directional switch, which can replace mechanical relays in many applications. And its high on-state current maximum rating and low on-state resistance is suitable to control a power line.
Features
4 pin SOP (2.54SOP4) : 2.1 mm high, 2.54 mm pitch
1-Form-A
Peak off-state voltage : 40 V (min)
Trigger LED current
: 3 mA (max)
On-state current
: 1 A (max)
On-state resistance
: 0.1 Ω (typ.)
Capacitance between output terminals : 300 pF (typ.)
Off-state current
: 1 nA (max)
Isolation voltage
: 1500 Vrms (min)
UL-recognized
: UL 1577, File No.E67349
cUL-recognized
: CSA Component Acceptance Service No.5A
File No.E67349
VDE-approved
: EN 60747-5-5 (Note 1)
JEDEC
―
JEITA
―
TOSHIBA
11−5H1
Weight: 0.1 g (typ.)
Note 1: When a VDE approved type is needed, please designate the Option(V4).
Pin configuration (top view)
Schematic
1
4
1
4
2
3
1 : Anode
2
3
2 : Cathode
3 : Drain
4 : Drain
© 2019
1
Toshiba Electronic Devices & Storage Corporation
Start of commercial production
2012-06
2019-06-17
Absolute Maximum Ratings (Ta = 25°C)
TLP3123
Detector
LE D
Characteristic Forward current Forward current derating (Ta ≥ 25°C) Reverse voltage Diode power dissipa...
Similar Datasheet