PI74ALVCH162244

PI74ALVCH162244111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222 16-Bit Buffer Driver with 3-State Outputs Product Features PI74ALVCH162244 is designed for low-voltage operation VCC = 2.3V to 3.6V Hysteresis on all inputs Typical VOLP (Output Ground Bounce) < 0.8V at VCC = 3.3V, TA = 25°C Typical VOHV (Output VOH Undershoot) < 2.0V at VCC = 3.3V, TA = 25°C Output ports have equivalent 26-Ohm series resistors: no external resistors are required Bus Hold retains last active bus state during 3-State, eliminating the need for external pullup resistors Industrial operation: –40°C to +85°C Packages available: – 48-pin 240 mil wide plastic TSSOP (A) – 48-pin 300 mil wide plastic SSOP (V) Logic Block Diagram Product Description Pericom Semiconductor’s PI74ALVCH series of logic circuits are produced using the Company’s advanced 0.5 micron CMOS technology, achieving industry leading speed. The PI74ALVCH162244 is an non-inverting 16-bit buffer/driver designed for low voltage 2.3V to 3.6V VCC operation. The buffer/driver is designed specifically to improve both the performance and density of 3-State memo...