250 MHz to 2400 MHz RF Variable Gain Amplifier
250 MHz to 2400 MHz RF Variable Gain Amplifier ADL5592
FEATURES
Output frequency range: 250 MHz to 2400 MHz Noise figure...
Description
250 MHz to 2400 MHz RF Variable Gain Amplifier ADL5592
FEATURES
Output frequency range: 250 MHz to 2400 MHz Noise figure: 5.7 dB at 1960 MHz OIP3 at 1960 MHz: 29 dBm at PIN = 0 dBm per tone 2 digital attenuators, each with 31 dB range 1 dB attenuation step size Single SPI port Single supply: 4.5 V to 5.5 V www.DataSheet4U.com 40-lead, 6 mm × 6 mm LFCSP package
FUNCTIONAL BLOCK DIAGRAM
RFOUT RFIN
LOIP LOOP EN
ATTENUATOR CONTROL CIRCUITRY
ADL5592
LOOP OUT SPI PORT*
06662-001
APPLICATIONS
GSM/EDGE and cellular communications systems
*COMPRISES THE DATA, CLK, AND LE PINS.
Figure 1.
GENERAL DESCRIPTION
The ADL5592 is a digitally programmable variable gain amplifier (VGA) designed for use from 250 MHz to 2400 MHz. Two digitally programmable attenuators are cascaded with a high linearity fixed-gain amplifier. The device also includes a mixer, which can be used to mix the transmitted signal into an adjacent receive band for loopback testing. The ADL5592 can be used in conjunction with a direct-to-RF modulator, such as ADL537x and ADL539x, in cellular communications systems such as GSM/EDGE. The ADL5592 is available in a 6 mm × 6 mm, 40-lead exposedpaddle LFCSP package. The device operates from the −40°C to +85°C temperature range.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from ...
Similar Datasheet