LH1510AABTR

www.vishay.com LH1510AAB, LH1510AABTR, LH1510AT Vishay Semiconductors 1 Form A Solid-State Relay (Normally Open) FEATURES Isolation test voltage 5300 VRMS Typical RON 12 Ω A1 6 S1 Load voltage 200 V Load current 200 mA / 350 mA C2 5 DC Clean bounce free switching Current limit protection 3 4 S2 Low power consumption Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The LH1510 is an SPST normally open switch (1 Form A) that can replace electromechanical relays in many applications. The relay is constructed using a GaAlAs LED for actuation control and high reliable MOSFETs for the output switch. In addition, it employs current-limiting circuitry to provide overvoltage protection. The LH1510 provides current limiting also for unidirectional DC applications. APPLICATIONS General telecom switching Metering Security equipment Instrumentation Industrial controls Battery management systems Automatic test equipment AGENCY APPROVALS UL1577, file no. E52744 ORDERING INFORMATION L H 1 5 1 PART NUMBER PACKAGE SMD-6, tubes SMD-6, tape and reel DIP-6, tubes 0 # # # ELECTR. PACKAGE VARIATION CONFIG. DIP T R TAPE AND REEL 7.62 mm UL LH1510AAB LH1510AABTR LH1510AT SMD > 0.1 mm Rev. 1.8, 05-Jul-2018 1 Document Number: 83810 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN A...