MT9T001P12STC

MT9T001 - 1/2-Inch 3-Megapixel Digital Image Sensor Features 1/2-Inch 3-Megapixel CMOS Digital Image Sensor MT9T001P12STC For the latest data sheet, refer to Micron’s Web site: www.micron.com/imaging www.DataSheet4U.com Features DigitalClarity™ Image sensor technology High frame rate Global reset release Horizontal and vertical binning Column and row skip modes Superior low-light performance Low dark current Simple two-wire serial interface Programmable controls: Gain, frame rate, frame size, exposure Pin-for-pin compatible with Micron’s 1.3-megapixel MT9M001 and 2-megapixel MT9D001 Table 1: Key Performance Parameters Typical Value 1/2-inch (4:3) 6.55mm(H) x 4.92mm(V) 8.19 (Diagonal) 2,048H x 1,536V 3.2μm x 3.2μm RGB Bayer pattern Global reset release (GRR), electronic rolling shutter (ERS) 48 MPS/48 MHz Programmable up to 12 fps Programmable up to 20 fps Programmable up to 27 fps Programmable up to 43 fps Programmable up to 93 fps 10-bit, on-chip >1.0 V/lux-sec (550nm) 61dB 43dB 3.0V−3.6V (3.3V nominal) 240mW (nominal); 2µW (standby) 0°C to +60°C 48-pin PLCC Parameter Optical format Active imager size Active pixels Pixel size Color filter array Shutter type Maximum data rate/ master clock QXGA (2,048 x 1,536) UXGA Frame (1,600 x 1,200) rate SXGA (1,280 x 1,024) XGA (1,024 x 768) VGA (640 x 480) ADC resolution Responsivity Dynamic range SNRMAX Supply voltage Power consumption Operating temperature Packaging Applications Digital still cameras Digi...