CY2SSTV16857

CY2SSTV16857 14-Bit Registered Buffer PC2700-/PC3200-Compliant Features Differential Clock Inputs up to 280 MHz Supports LVTTL switching levels on the RESET pin Output drivers have controlled edge rates, so no www.DataSheet4U.com external resistors are required Two KV ESD protection Latch-up performance exceeds 100 mA: JESD78, Class II Conforms to JEDEC STD (JESD82-3) for buffered DDR DIMMs 48-pin TSSOP When RESET is LOW, the differential input receivers are disabled, and undriven (floating) data, clock, and REF voltage inputs are allowed. In addition, when RESET is LOW, all registers are reset and all outputs force to the LOW state. The LVCMOS RESET input must always be held at a valid logic HIGH or LOW level. To ensure defined outputs from the register before a stable clock has been supplied, RESET must be held in the LOW state during power-up. In the DDR registered DIMM application, RESET is specified to be completely asynchronous with respect to CLK and CLK. Therefore, no timing relationship can be guaranteed between the two. When entering reset, the register will be cleared and the outputs will be driven LOW quickly, relative to the time to disable the differential input receivers, thus ensuring no glitches on the output. However, when coming out of reset, the register will become active quickly, relative to the time to enable the differential input receivers. As long as the data inputs are low, and the clock is stable during the time from the LOW-to-HIGH t...