TOSHIBA Photointerrupter Infrared LED + Phototransistor
TLP830(F)
Track "00" Sensor For Floppy Disk Drive Detection Of S...
TOSHIBA Photointerrupter Infrared LED + Photo
transistor
TLP830(F)
Track "00" Sensor For Floppy Disk Drive Detection Of Sub−Scanning Quantity By Image Scanner Various Position Detection Sensor
TLP830(F)
TLP830(F) is a photointerrupter which uses a high−radiant power GaAs LED and a fast−response Si photo
transistor. The device is high resolution with a narrow slit pitch.
Small package: 7.4 mm (H), 4.5 mm (D) Printed wiring board direct mounting type
(with a locating pin). Board thickness: 1mm or less Short lead type enabling automated mounting Gap: 2mm High resolution: Slit width 0.15mm High current transfer ratio: IC/IF = 3% (min) High temperature operation: Topr = 95°C (max) Material of the package:
Polybutylene terephthalate (UL94V−0, black color) Detector side is of visible light cut type.
TOSHIBA Weight: 0.4 g (typ.)
11−11C1
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Forward current
Forward current Ta > 25°C
LED derating
Ta > 85°C
Reverse voltage
Collector−emitter voltage
Emitter−collector voltage
Detector Collector power dissipation Collector power dissipation derating (Ta > 25°C) Collector current
Operating temperature range
Storage temperature range
Soldering temperature (5 s)
Symbol IF
ΔIF / °C
VR VCEO VECO
PC ΔPC / °C
IC Topr Tstg Tsol
Rating 50
−0.33 −2 5 35 5 75
−1
50 −30 to 95 −40 to 100
260
Unit mA
mA / °C
V V V mW mW / °C mA °C °C °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/...