LH1532FPTR

LH1532FP/FPTR Dual 1 Form A Solid State Relay FEATURES Two Independent Relays in a Single Package Package—FLAT PAK l/O Isolation, 3000 VRMS Solid-state Relay (Equivalent to AQW210S) – Typical RON 20 Ω – Load Voltage 350 V – Load Current 120 mA – Current Limit Protection – High Surge Capability – Linear, AC/DC Operation – Clean Bounce Free Switching – Low Power Consumption – High Reliability Monolithic Receptor AGENCY APPROVALS UL – File No. E52744 APPLICATIONS General Telecom Switching – On/off Hook Control – Ring Relay – Ground Start Industrial Controls – Triac Predriver – Output Modules Peripherals – Transducer Driver Instrumentation – Automatic Tuning/Balancing – Flying Capacitor – Analog Multiplexing See Application Note 56 DESCRIPTION The LH1532FP is a Dual 1 Form A (SPST) which can replace electromechanical relays in many applications. They are constructed using a GaAlAs LED for activation control and an integrated monolithic die for the switch output. The die is comprised of a photodiode array, switch control circuity and MOSFET switches. The SSR features low ON-resistance, high breakdown voltage and current-limit circuitry that protects the relay from telephone line induced lightning surges. The LH1532FP comes in an 8 pin, 0.080 inch thick plastic Flat Pack: surface mount leads with100 mil spacing. Dimensions in Inches (mm) .029 (.74) pin one ID .180 (4.57) A 1 K 2 A 3 K 4 8 S1 7 S’1 6 S2 5 S’2 .374 typ. (9.50) See Detail A .000–.004 (.000–.102) ...