600W Surface Mount Transient Voltage Suppressor
600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA
600W Surface Mount Transient Voltage Suppressor
F...
Description
600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA
600W Surface Mount Transient Voltage Suppressor
Features
www.DataSheet4U.com z Breakdown
SMB
z z z z z z z z
voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR For unidirectional types Typical IR less than 1 µA above 10V
High temperature soldering guaranteed:250°C/10 seconds at terminals This series is UL recognized under component index. File number E315008 RoHS Compliant
Mechanical Data
Case: Epoxy: Terminals: Polarity: Mounting position: Weight: JEDEC DO-214AA (SMB) molded plastic over glass passivated junction Meets UL 94V-0 flammability rating Solder plated, solderable per MIL-STD-750, Method 2026 Color band denoted positive end (cathode) except Bi-directional Any 0.003 ounces, 0.093 gram
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol PPPM IPPM IFSM Description
Peak Pulse Power Dissipation on 10/1000μs Waveform Peak Pulse Current on 10/1000μs Waveform Peak Forward Surge Current Operating Junction and Storage
Value
Minimum 600 See Table 100 -55 to 150
Unit
W A A °C
Conditions
Non-repetitive current pulse, per FIG.3 and derated above TA=25° C per FIG.2 Non-repetitive current pulse 8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note 1,2)
TJ,TSTG Temperature Range
Note: 1. Mounted on 5.0mm x 5.0mm (0.03mm thick) copper pads to each ter...
Similar Datasheet