Surface Mount Transient Voltage Suppressor
P6SMB SERIES
Surface Mount Transient Voltage Suppressor
Voltage Range 6.8 to 200 Volts 600 Watts Peak Power
Features
Fo...
Description
P6SMB SERIES
Surface Mount Transient Voltage Suppressor
Voltage Range 6.8 to 200 Volts 600 Watts Peak Power
Features
For surface mounted application in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability www.DataSheet4U.com Fast response time: Typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1μA above 10V High temperature soldering guaranteed: 250OC / 10 seconds at terminals Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 600 watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle
.082(2.08) .076(1.93)
SMB/DO-214AA
.147(3.73) .137(3.48)
.187(4.75) .167(4.25) .012(.31) .006(.15)
.103(2.61) .078(1.99) .012(.31) .006(.15) .056(1.41) .035(0.90) .208(5.28) .200(5.08) .008(.20) .004(.10)
Mechanical Data
Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Standard packaging: 12mm tape (EIA STD RS-481) Weight: 0.093gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified. Type Number Symbol Value
Peak Power Dissipation at TA=25OC, Tp=1ms(Note 1) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2, 3) - Unidirectional Only Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4) Operating and Storage Temperature Rang...
Similar Datasheet